|
|
|
Home::Home & Garden
10 Tips On Cutting Plywood Correctly
Author : Cedar Creek Woodshop
10 Tips On Cutting Plywood Correctly
1. Avoid Cross Cutting – Plywood tends to chip the most when cut across its width (grain). Cutting along the length of the wood will help to reduce chipping.
2. Use the Right Blade – Special blades are manufactured for different cutting jobs. The number of teeth, width, angle, and rake of the blade all impact the cut. Choose a blade that best matches your specific cutting situation.
3. Circular Saw – cut with the “best face” down.
4. Table Saw – cut with the “best face” up.
5. Score the Cut First – Run the plywood through the saw removing only a minimal amount of wood. The next cut will leave a cleaner cut.
6. Masking Tape – Put masking tape over the cut line to help keep the fibers on the edge from pulling up.
7. Backing Panel – Attach a backing panel with strong double stick tape. The backer board will take the brunt of the damage.
8. Use a Router – A router fitted with a straight bit will cut a clean line. A pilot bit and straight edge will help provide a clean line.
9. Score with a Utility Knife – Score the cut line with a utility knife.
10. Buy a Panel Scoring Setup – Some saws can be fitted with a plywood panel scoring setup and are ideal if you have to cut a lot of plywood. The setup consists of a smaller blade that scores the surface of the plywood before it reaches the cutter.
Brought To You Courtesy: http://www.cedarcreekwoodshop.com”>Cedar Creek Woodshop
About the Author
None Related articles
|
|
|